Forums46
Topics539,492
Posts9,750,307
Members87,166
|
Most Online25,604 Feb 12th, 2024
|
|
|
First rifle...stainless or not
#5222104
07/28/14 02:46 PM
|
Joined: Jul 2014
Posts: 351
Nick1
OP
Bird Dog
|
OP
Bird Dog
Joined: Jul 2014
Posts: 351 |
Hey, new member here. I've been looking for a first deer rifle for several weeks. Handled many at stores and keep coming back to Tikka 3 lite. Also I'm left handed so really wanted a left handed rifle. LH rifles are nearly impossible to find off the rack. So yesterday I walk into Gander Mtn and they have a Tikka 3 lite LH model, but it's a stainless barrel. Never really considered it, but it was literally the only left handed model in the store. Its a 270 which I'm fine with. Would like to hear from those who have a stainless barrel with regards to it glinting, or flashing in the field for deer to spot. Any advice on what scope in the 200$ range is also appreciated.
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222129
07/28/14 03:01 PM
|
Joined: Nov 2010
Posts: 6,301
scalebuster
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Nov 2010
Posts: 6,301 |
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222133
07/28/14 03:02 PM
|
Joined: Jan 2011
Posts: 657
DRT1
Tracker
|
Tracker
Joined: Jan 2011
Posts: 657 |
Good rifle like it a lot with no down side, scope price may be a prblm but for the money I'd try to find a Nikon buck master or pro staff at least a 12 power.. Good luck
In God I trust.. all others are suspect. ;))
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222134
07/28/14 03:02 PM
|
Joined: Oct 2012
Posts: 29,764
Sneaky
THF Celebrity
|
THF Celebrity
Joined: Oct 2012
Posts: 29,764 |
It's not a big deal. If you end up not liking the stainless, you can always have it Cerakoted.
Look at Vortex, Nikon, and Bushnell in that price range.
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222161
07/28/14 03:16 PM
|
Joined: Oct 2009
Posts: 12,274
wp75169
THF Celebrity
|
THF Celebrity
Joined: Oct 2009
Posts: 12,274 |
I don't think the stainless on the T3 is very reflective. You should not have any issues with it. Also if you are close to a cabelas they usually keep 3 different calibers of LH T3 Lites on the shelf. And I think they are a few $$ cheaper than gander mountain.
$200 Nikon or Vortex
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222182
07/28/14 03:24 PM
|
Joined: Sep 2004
Posts: 6,407
WileyCoyote
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Sep 2004
Posts: 6,407 |
Been running Matte Finished Stainless guns since they came out - Weatherby Mk V,Savage & Stevens, Browning, Winchester & Tikka's - and have not noticed the problem you described a concern for.
+1 on a Tikka T3 as a solid 1st gun choice , have owned a couple T3's & trust them for the Features they have - currently have a 270 SS/syn Lite like you are looking at - and tend to believe it's a Non Issue. Non Matte or Polished finish's can be a problem no matter what color they are, IMO Ron
It is TIME for Term Limits, cause Politicians are like childrens diapers and for the same reasons...Robin Williams "These are the times that try men's soul's"...Thomas Paine
"Those who fail to learn from History are doomed to repeat it" ....Santayana
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222207
07/28/14 03:37 PM
|
Joined: Jul 2014
Posts: 351
Nick1
OP
Bird Dog
|
OP
Bird Dog
Joined: Jul 2014
Posts: 351 |
Glad to hear the Tikka 3 is a good choice. I have asked several of my hunting friends and not one of them could say anything negative aside from a few small issues (recoil pad, plastic shroud), both of which are easy fixes. I'm also glad to hear experienced hunter are using stainless. I'd hate to be "that guy" who brought a stainless barrel to his first hunt.
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222320
07/28/14 04:39 PM
|
Joined: Jul 2013
Posts: 2,790
Gone to Texas
Veteran Tracker
|
Veteran Tracker
Joined: Jul 2013
Posts: 2,790 |
Tikka T3 Lite in 270 is going to have some harsh recoil, if you are alright with that then get it. There are several after market recoil pads you can get as well to help.
Vortex Diamondback scope is the best in the 200 price range IMO. If it comes with scope rings, great. Otherwise, Warne makes some good ones for 50 bucks or so.
Tikka is a great rifle to start with, I would go with a lighter caliber but I am partial to less recoil.
Practice, practice, practice.
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222329
07/28/14 04:44 PM
|
Joined: Aug 2006
Posts: 11,657
colt45-90
Texas colt45
|
Texas colt45
Joined: Aug 2006
Posts: 11,657 |
go for it, if the recoil is a factor (get over it) get a shoulder pad, one gun..can't go wrong with the .270
hold on Newt, we got a runaway
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222343
07/28/14 04:54 PM
|
Joined: Sep 2004
Posts: 6,407
WileyCoyote
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Sep 2004
Posts: 6,407 |
Careful there...Peer Group Pressure can be a giant PIA.
Tikka T3 aftermarket stuff is not plentiful... but doable in matching Bolt Shroud, Bolt Handle, I've heard of but not seen Trigger Guard & Mag Well one Piece. I've done the Screw On Limbsaver but ya gottsa be real careful with copper solvent or it'll make the LS Pad soft & gooey and I'd look at doing a Screw On Pre Cut Pachmayer if I could find one to look at one 1st.
An upgrade I'll mention is the B&C Medallist drop in stock with the full length internal Aluminum frame that really stiffens up the Synthetic Stock - look at Stocky's to see one. You can do a custom paint job on any of the Carbon fiber/'glass stocks too. A McMillan is the Rolls Royce of the carbon/'glass stocks but will cost more than the rifle and has a loooong wait time most of the time. Not for me since I'm more into cheap scotch than VSOP Cognac these days.
I'd also mention something I'm considering is a Boyd's finished drop in stock in a Classic Grade low shadow style cheek piece style in either either a Laminate or a choice of Maple & Walnut with choices of some checkering patterns, Brand of Recoil pad cut to my specified LOP and other stuff at about the same or less $$$Bux than a B&C Medallist...or even a Lam Thumbhole to help with recoil in a harder kicker since my cranky shoulder is cratering for under $175-$200 total. Several sources for Laminates, which are an all weather option, but Do Not absorb recoil at all. Ron
It is TIME for Term Limits, cause Politicians are like childrens diapers and for the same reasons...Robin Williams "These are the times that try men's soul's"...Thomas Paine
"Those who fail to learn from History are doomed to repeat it" ....Santayana
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222387
07/28/14 05:22 PM
|
Joined: Mar 2011
Posts: 2,062
Toxarch
Veteran Tracker
|
Veteran Tracker
Joined: Mar 2011
Posts: 2,062 |
Gearhog has the Vortex Crossfire II 4-12x44 on sale WITH rings and other stuff. http://www.gearhog.com/?did=68147
It is far more important to be able to hit the target than it is to haggle over who makes a weapon or who pulls a trigger.
� Dwight D. Eisenhower
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222393
07/28/14 05:32 PM
|
Joined: Sep 2006
Posts: 32,592
kmon11
junior
|
junior
Joined: Sep 2006
Posts: 32,592 |
Tikka T3s are very good guns. Like the others have said the mate stainless has never been an issue. I would also check Cabela's like WP said usually a little cheaper than GM and normally have several to choose from.
For the scope, check with SWFA Sample list for the ones suggested and check with Skylar for the promo codes for THF members (save a little $) Camera land also has good demo models sometimes. Those options often allow for more scope for the same or less $
lf the saying "Liar, Liar your pants on fire" were true Mainstream news might be fun to watch
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222433
07/28/14 06:08 PM
|
Joined: Aug 2010
Posts: 697
JD4030
Tracker
|
Tracker
Joined: Aug 2010
Posts: 697 |
If you like the rifle, look online at bud's gun shop. Great selection and the best prices I have found.
Custom hay cutting / baling, combining in Southern Dallas / Ellis county; please visit our website or send me a PM for pricing, etc: http://stewart-farms.net/
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222692
07/28/14 08:36 PM
|
Joined: Apr 2011
Posts: 400
KingwoodCat
Bird Dog
|
Bird Dog
Joined: Apr 2011
Posts: 400 |
Midway USA sells a camo wrap that has no glue in it if you are real concerned.
The Federal Government cannot give anything to anyone, that it has not first taken from someone else.
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222822
07/28/14 09:46 PM
|
Joined: Jul 2014
Posts: 351
Nick1
OP
Bird Dog
|
OP
Bird Dog
Joined: Jul 2014
Posts: 351 |
Thanks for the input. I bought the Tikka 3 lite in ss today. I talked to several buddies of mine who have SS barrels and they have shot many deer w/ SS. So that's not a concern for me anymore. I priced them at Bass and at Gander Mtn. Only a 20$ difference (more) at GM AND it was left handed on the shelf. So I got it. I bought a Leupold VX2 3-9x40 scope which was also on sale. Need to range time now. Thanks again for the input. I'll try to remember to give a report from the range. I may try to upload pick if I can figure it out.
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5222932
07/28/14 10:46 PM
|
Joined: Sep 2004
Posts: 6,407
WileyCoyote
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Sep 2004
Posts: 6,407 |
As you've dicovered Southpaw Shooters are not common. and will likely almost disappear from inventories the closer to Season we get. Have fun and take your time. Light Weight Rifles can take some getting used to in staying on target during the sight acquisition & firing sequence. Ron
It is TIME for Term Limits, cause Politicians are like childrens diapers and for the same reasons...Robin Williams "These are the times that try men's soul's"...Thomas Paine
"Those who fail to learn from History are doomed to repeat it" ....Santayana
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5223297
07/29/14 02:12 AM
|
Joined: Dec 2008
Posts: 41,357
J.G.
THF Celebrity
|
THF Celebrity
Joined: Dec 2008
Posts: 41,357 |
Can't go wrong with a T-3. Left handers only come in stainless.
Don't let anyone tell you to buy a RH rifle. It's wrong and I can prove it.
But it, learn ti shoot it, practice with it and it will last a long time.
Their stainless is a bead last look. If it's too shiny for your liking it is a simple process to rattle can it. I've rattle canned $3k worth ilof rifle/optic/base ring/ stock in one rifle. Repeat three other times Acetone makes it all go away.
800 Yard Steel Range Precision Rifle Instruction Memberships and Classes Available
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5223374
07/29/14 02:40 AM
|
Joined: Dec 2008
Posts: 41,357
J.G.
THF Celebrity
|
THF Celebrity
Joined: Dec 2008
Posts: 41,357 |
No worries of stainless. If fact myself and many other shooters who build custom rifles prefer stainless. It is a bit harder and will handle more rounds before it goes bad. I doubt you'll shoot the barrel out, some of us wear it like a badge of honor, it takes so many rounds to cause.
800 Yard Steel Range Precision Rifle Instruction Memberships and Classes Available
|
|
|
Re: First rifle...stainless or not
[Re: J.G.]
#5223425
07/29/14 03:03 AM
|
Joined: Jul 2014
Posts: 351
Nick1
OP
Bird Dog
|
OP
Bird Dog
Joined: Jul 2014
Posts: 351 |
Can't go wrong with a T-3. Left handers only come in stainless.
Don't let anyone tell you to buy a RH rifle. It's wrong and I can prove it.
But it, learn ti shoot it, practice with it and it will last a long time.
Their stainless is a bead last look. If it's too shiny for your liking it is a simple process to rattle can it. I've rattle canned $3k worth ilof rifle/optic/base ring/ stock in one rifle. Repeat three other times Acetone makes it all go away. Yea, I almost just bought a RH rifle several weeks ago. I know I could've have ordered a LH one, but I wanted to buy the rifle I held in my own hands. Holding out worked for me in finding the LH rifle. I also learned to look in places you wouldn't normally look. I only looked at academy and Bass... and boom found the rifle I wanted just across the way.
|
|
|
Re: First rifle...stainless or not
[Re: J.G.]
#5223585
07/29/14 04:53 AM
|
Joined: Sep 2006
Posts: 32,592
kmon11
junior
|
junior
Joined: Sep 2006
Posts: 32,592 |
No worries of stainless. If fact myself and many other shooters who build custom rifles prefer stainless. It is a bit harder and will handle more rounds before it goes bad. I doubt you'll shoot the barrel out, some of us wear it like a badge of honor, it takes so many rounds to cause. Agree about wearing out a barrel, if you like the rifle enough and shoot out a barrel then you are very familiar with it and have shot it enough to have lots of fun, a new barrel and back in business. Some of my favorite rifles are "barrel burners" but knew that going in.
lf the saying "Liar, Liar your pants on fire" were true Mainstream news might be fun to watch
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5223588
07/29/14 04:55 AM
|
Joined: Sep 2006
Posts: 32,592
kmon11
junior
|
junior
Joined: Sep 2006
Posts: 32,592 |
Can't go wrong with a T-3. Left handers only come in stainless.
Don't let anyone tell you to buy a RH rifle. It's wrong and I can prove it.
But it, learn ti shoot it, practice with it and it will last a long time.
Their stainless is a bead last look. If it's too shiny for your liking it is a simple process to rattle can it. I've rattle canned $3k worth ilof rifle/optic/base ring/ stock in one rifle. Repeat three other times Acetone makes it all go away. Yea, I almost just bought a RH rifle several weeks ago. I know I could've have ordered a LH one, but I wanted to buy the rifle I held in my own hands. Holding out worked for me in finding the LH rifle. I also learned to look in places you wouldn't normally look. I only looked at academy and Bass... and boom found the rifle I wanted just across the way. Congrats on finding what you were looking for. Did you go with the LH Tikka? really enjoy the Tikkas I have good shooters with reliable almost boring accuracy out of the box.
lf the saying "Liar, Liar your pants on fire" were true Mainstream news might be fun to watch
|
|
|
Re: First rifle...stainless or not
[Re: kmon11]
#5224250
07/29/14 05:27 PM
|
Joined: Jul 2014
Posts: 351
Nick1
OP
Bird Dog
|
OP
Bird Dog
Joined: Jul 2014
Posts: 351 |
Can't go wrong with a T-3. Left handers only come in stainless.
Don't let anyone tell you to buy a RH rifle. It's wrong and I can prove it.
But it, learn ti shoot it, practice with it and it will last a long time.
Their stainless is a bead last look. If it's too shiny for your liking it is a simple process to rattle can it. I've rattle canned $3k worth ilof rifle/optic/base ring/ stock in one rifle. Repeat three other times Acetone makes it all go away. Yea, I almost just bought a RH rifle several weeks ago. I know I could've have ordered a LH one, but I wanted to buy the rifle I held in my own hands. Holding out worked for me in finding the LH rifle. I also learned to look in places you wouldn't normally look. I only looked at academy and Bass... and boom found the rifle I wanted just across the way. Congrats on finding what you were looking for. Did you go with the LH Tikka? really enjoy the Tikkas I have good shooters with reliable almost boring accuracy out of the box. Yes I did finally find a LH Tikka. Very happy with purchase...although I haven't shot it yet
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5225390
07/30/14 03:40 AM
|
Joined: Oct 2008
Posts: 2,192
TexasVine
Veteran Tracker
|
Veteran Tracker
Joined: Oct 2008
Posts: 2,192 |
Congrats from another left handed shooter. Stainless is a good choice.
TexasVine
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5228664
07/31/14 08:48 PM
|
Joined: Jul 2014
Posts: 351
Nick1
OP
Bird Dog
|
OP
Bird Dog
Joined: Jul 2014
Posts: 351 |
Went to the range yesterday with an experienced hunter/ friend of mine. He helped me sight the 270 in. The recoil was pretty stout, but not as bad as expected. I'm really happy I chose a 270 and not a lighter caliber. I shot about 14 shots at 50 yards, then 5 shots at 100. Fairly good grouping, defiantly need more range time. Shoulder is a little sore, but have a limbsaver on order. With stock recoil pad though, wasn't too bad. I've never been deer hunting but am hoping with some more range time, and a patient guide to teach me the ropes, I'll be ready for this deer season. I'll try to update progress regularly on this journey to go from never shooting a rifle, to becoming a proficient hunter. From what I understand,based on age I don't need to take a hunter ed course (I'm 45), I may do it anyway just to get as much knowledge as I can. Any other resources and tips are appreciated.
|
|
|
Re: First rifle...stainless or not
[Re: Nick1]
#5228713
07/31/14 09:16 PM
|
Joined: Dec 2008
Posts: 41,357
J.G.
THF Celebrity
|
THF Celebrity
Joined: Dec 2008
Posts: 41,357 |
You're doing good. Keep shooting, you will get better. Learn the vitals of every animal you will be hunting so when the time comes you can properly place the shot. Save your brass. It is now fire formed for your rifle. You may want to load your own some day or have someone load it for you. There is no better brass than second fired brass from the same rifle once it's been properly resized and all of them trimmed to the same length. Plus its just plain wasteful to throw it away. If nothing else, someone will give you cash for it.
800 Yard Steel Range Precision Rifle Instruction Memberships and Classes Available
|
|
|
Moderated by bigbob_ftw, CCBIRDDOGMAN, Chickenman, Derek, DeRico, Duck_Hunter, hetman, jeh7mmmag, JustWingem, kmon11, kry226, kwrhuntinglab, Payne, pertnear, rifleman, sig226fan (Rguns.com), Superduty, TreeBass, txcornhusker
|