|
Forums46
Topics538,678
Posts9,739,995
Members87,103
| |
Most Online25,604
Feb 12th, 2024
|
|
|
 Remington 11-87 * HELP*
#3645651
10/09/12 08:52 PM
|
Joined: Aug 2011
Posts: 1,803
elcasador
OP
Pro Tracker
|
|
OP
Pro Tracker
Joined: Aug 2011
Posts: 1,803 |
My uncle just bought a Remington 11-87 Super Mag. Used but in very good condition. We were needing a little help concerning the barrel seal activator. He is going to be using this gun for geese and sandhill crane only(3" & 3 1/2" shells only). My question is does he need the barrel seal activator in place or does that only need to be in installed in order to cycle the 2 3/4" shells? Any advice would be very much appreciated.
Thank you
|
|
|
|
Re: Remington 11-87 * HELP*
[Re: elcasador]
#3647612
10/10/12 02:29 PM
|
Joined: Aug 2011
Posts: 1,803
elcasador
OP
Pro Tracker
|
|
OP
Pro Tracker
Joined: Aug 2011
Posts: 1,803 |
|
|
|
|
Re: Remington 11-87 * HELP*
[Re: elcasador]
#3656174
10/13/12 12:55 PM
|
Joined: Dec 2010
Posts: 38
drake_taker
Light Foot
|
|
Light Foot
Joined: Dec 2010
Posts: 38 |
On page 7 of the manual it says:
"Model 11-87™ super magnum™ owners please note: a barrel seal activator is used on the model 11-87 super magnum for 2 3/4 loads. Make sure the barrel seal activator is in the correct position (see picture 31, p.17) for use with 2 3/4" loads. Removal of the barrel seal activator is recommended only when using 3" or 3 1/2" loads."
You have it right; he only needs the activator if he wants to shoot 2 3/4 loads.
David
Last edited by drake_taker; 10/13/12 12:56 PM.
|
|
|
Moderated by bigbob_ftw, CCBIRDDOGMAN, Chickenman, Derek, DeRico, Duck_Hunter, hetman, jeh7mmmag, JustWingem, kmon11, kry226, kwrhuntinglab, Payne, pertnear, rifleman, sig226fan (Rguns.com), Superduty, TreeBass, txcornhusker
|
