Forums46
Topics538,081
Posts9,732,766
Members87,065
|
Most Online25,604 Feb 12th, 2024
|
|
|
Sightmark Photon - Ran out of adjustment
#8880800
07/11/23 12:36 PM
|
Joined: Sep 2012
Posts: 2,095
Booner1
OP
Veteran Tracker
|
OP
Veteran Tracker
Joined: Sep 2012
Posts: 2,095 |
Recently purchased a used Sightmark Photon XT, used the existing rings that it came with and mounted it on my AR 5.56 . Finally got around to trying to zero this thing in so that I could take care of some coons that are being a PIA and a few hogs. Long story short, maxed out the elevation adjustment and still about 4" low, got the windage dead on but it is maxed out as well . Any suggestions on what to do ??? Different rail, mounts, shims ??? I have no clue, new to the NV scene and was really disappointed that I didn't get to do harm to those coons. Lol Any advise would be appreciated.
TIA, Booner
Born to hunt and fish.
|
|
|
Re: Sightmark Photon - Ran out of adjustment
[Re: Booner1]
#8880885
07/11/23 03:34 PM
|
Joined: Mar 2011
Posts: 637
Outdoor Legacy
Tracker
|
Tracker
Joined: Mar 2011
Posts: 637 |
This was a fairly common problem back in the Photon days because there is very little adjustment in the reticle compared to modern digital NV optics. The first thing to do is take the scope out of the rings and move the front ring to the back and the back ring to the font. This just ensures you don't have a bad ring (very unlikely) but if you do, you'll now be maxing the reticle out but you'll be high instead of lwo.
Then very carefully tighten the rings down on the scope carefully at the same time, keeping the scope level. Now shoot again. If you have still have the issue your best bet is going to be to shim the scope inside the rings. You could have a defective scope but they are long out of warranty and production, so you're going to have to get creative to make it work. Shimming it is a very reasonable solution if you can't make anything else work.
Good luck!
Jason
Outdoor Legacy - Owner The Late Night Vision Show - Co-Host Night Vision, Thermal & AccessoriesOutdoorLegacyGear.com (877)350-1818
|
|
|
Re: Sightmark Photon - Ran out of adjustment
[Re: Booner1]
#8880916
07/11/23 04:32 PM
|
Joined: Aug 2006
Posts: 925
BigDad
Tracker
|
Tracker
Joined: Aug 2006
Posts: 925 |
You may want to try Burris Signature Zee 30MM rings. They have plastic inserts that can be used to adjust POI. I have used them on several of my rifles and they work very well. They are available for several different style bases including picatinny/weaver. https://www.burrisoptics.com/mounting-systems/signature-rings
Joe
|
|
|
Re: Sightmark Photon - Ran out of adjustment
[Re: Booner1]
#8881267
07/12/23 11:17 AM
|
Joined: Sep 2011
Posts: 3,038
Vern1
Veteran Tracker
|
Veteran Tracker
Joined: Sep 2011
Posts: 3,038 |
Take it apart and mount the rings first and tighten them at base then set the scope in place and tighten. That is what the factory told me and it worked for me - they also suggested TALL rings which helped my cheek weld.
Edit: This was with an early Photon 5X and it's still killing pigs.
Last edited by Vern1; 07/12/23 11:18 AM.
Cheers, Vern1 Texans since The Old 300 in 1824 NRA Lifetime Member
|
|
|
Moderated by bigbob_ftw, CCBIRDDOGMAN, Chickenman, Derek, DeRico, Duck_Hunter, hetman, jeh7mmmag, JustWingem, kmon11, kry226, kwrhuntinglab, Payne, pertnear, rifleman, sig226fan (Rguns.com), Superduty, txcornhusker
|