OK so my brother-in-law just got some guns from family over thanksgiving. One of these is an old CBC 151 single shot .410 Brazilian made. early to mid 70's. I was asked if I knew where he might find an ejector. My only advice was Numrich. They do have the part listed but it is out of stock. So now I'm asking here. Does anyone have any recommendations or ideas on where else might have the part?

Brownells and Midway would be my next places to look.

TDK might be able to make one

sounds like a tough search. Did you call Numrich, see if they can get one? Is it an extractor or a real ejector? Does it shoot the empties out when you break it open.?

There used to be a shop in Irving, Lee's Gun Parts. it was a LONG time ago I bought a TINY spring there for the magazine catch on a Hi-Standard Victor

Making one will likely cost more than the gun is worth. However Numrich has other gauge extractor that could be used as a pattern for making one or modified to 410.
You may be able to backorder the part, may take forever.

M

I had checked brownells. I didn't think about midway but just checked and neither have it.


TDK? is that a member name or some acronym I'm not familiar with?

No have not tried to call Numrich only looked on the web. So that will be something I will recommend.

Because I don't have the gun in front of me and I'm not the one actually working on it I am unsure if it is extractor or ejector, only what I was told. If it becomes more of a problem I can try and get more information from him.

Thanks guys. I'll pass word along and see what a phone call to numrich turns up.

It was a guy in the Dallas area that went to the gun shows called Lee's Gun Parts.I understand he bought old guns and sold the parts You might try to locate him..