I have a 22 LR Marlin A1 that needs some TLC (60+ yrs old), but I can't disassemble it. The bolt handle spins, but it can't remove it so I can't remove the bolt.

Any insight or direction on where to get the information I need would be great appreciated.

This is a step by step guide. Hope it helps.

http://www.pbase.com/tigweld/marlin_a1_1st_var

Awesome!! Thank you very much!

Wow! Thanks Grizz. Took the gun down and cleaned it thoroughly. I found that the bottom of the feed ramp had a slight dimple on it, and it wouldn't feed the last round or 2 form the mag. I touched it a couple of times with my Dremel, and it works fine now. I'm going to try to polish it a little in the next day or 2, but it already works now. Thanks for the help.