Looking for a good load with either 100gr barnes TSX or 110gr nosler accubond...what do you guys recomend

Retumbo!

Try the 80 grain TTSX

Its my buddies rifle and I have some 100gr TSX laying around that the can try a few for free.

They will be shot out of a 700 sendero if that helps anyone.

He hunts west of childress where 200lbs+ deer are the norm, so I am thinking 100gr TSX or Accubonds at max velocity

Darn't I was wanting some one to experiment

I got a bunch of 25-06 cases, the 80 ttsx in my Roy is nasty would love to try them in my 25-06

I get over 3200 fps with 110-grain Accubonds using Retumbo. The 110-grain Accubond will take 'em down like the hammer of Thor.

if you have a handfull of the 80grTTSX we can load them up and report back with results

Do you have the factory 257 load data also

Never saw a 25-06 that did not shoot really well with 53gr of IMR-4350 when using the 100gr TSX and 3.23" OAL.

I have the data they post on their website

Humm...might work something out got a ton of 257wby cases I need loaded with 80gr Ttsx also

I had my best luck out of my 25-06 with IMR 4350 as well.

I use Hodgen 4831 SC with Sierra Spitzer Boat Tails 117gr. I found it worked best loaded on the max side. 52 to 52.5 grs. I think I am 5 of 5 one shot... dropped in tracks deer harvests Rifle is Savage 110.

This but I use 4831 with very good results.

100 grn nos,bt 50grns imr 4007ssc 3380 fps 3 shot groups under 5/8 of a inch ruger 77 mkii 50.8 grns is max used in 3 other rifles all shot under a inch

pet load ive shot in dozens of 25/06 52 gr. imr 4350 , cci br2 primer, barnes tsx

52.5gr h 4831sc 117 hornady btsp
61gr H4831sc. 80gr ttsx

Both loads will shoot 1/2" at 100 yards.

The one I load for my buddy Page in his Rem Sendero is RL 22 w/100 grain X or TTSX and he gets same hole groups...I went 5 grains off max fitted the cartridge and projectile to his rifle
and loaded 2 rounds for each 1/10 grain up to max..he hit at about 3/10's off max shoots same hole groups...Most hunters shoot
factory production rifles and need to break in the bbls..100 rounds of shooting and cleaning, and lap a little sometimes and
when shooting Barnes, solid copper spend some time getting your
weapon clean..Don