Bush Hog Parts

I was given a bush hog 3 point tandem disc harrow and it needs a little work. It needs the berring on one row of disc. I have searched for the model # and can not find it. I have went to several bush hog dealers and nothing without a model #. Is there someone out there that might be able to help point me in a direction. I have done search on google and all I can find is part #'s but I have no idea which part matches the #'s. It is a two row and measures about 6ft wide.

ttt

Remove a bearing and take to any major brg supply company or even auto parts house. They can help you by measuring brg od, id, thickness, type, service, etc, Also look on brg for part numbers etched or stamped.
Bush Hog uses brg from many manufacture such as timken, ihc, and any good brg place can cross reference you to several brands of brgs. Take your flanges or housing with you to asure proper and fit.

Kinda like tires

one of many
Purvis Bearing Services Inc - Place page
purvisindustries.com - 3000 Airport Freeway, Fort Worth - (817) 831-4581

Will be Cheaper to get from brg house that BH dealer.

Also check your local ag eq dealers. They can measure and cross reference over also

I can get the bearing out but I also need the flanges and probly the spacers. I know it is a 1 1/8 square shaft but i would like to find a break down of the assy.

Bush hog probably had a sub contrator build them...Maybe hard to find. call bush hog inc.

Thanks

Is that a 4-wheel drive bush hog?

I am not sure what you are asking. It is a farm implement and it does have 2 sets of disk which consist of 2 front and 2 back

http://www.tractorsupply.com/agriculture-farming-ranching/bearings-flanges/bearings/

http://www.tractorsupply.com/agriculture-farming-ranching/bearings-flanges/flanges/

I buy mine here

http://www.agrisupply.com/product.asp?pn=32626&sid=&eid=

They are real good to deal with. Can you post a pictre of the plow and a close up up the bearing and flange?

Make sure you have the right brand since you don't have the model number. Any major farm implement store that sells tractors and implements should be able to help. There is a Ford-New Holand dealor on the hwy (80?) between Mineral Wells and Weatherford that carries a lot of parts for mowers and implements. I can't remember their name.... Maybe J & H? I bought parts from them before. Some tractor supply stores are better then others. The ones in small farming communities carry a lot more of this kind of stuff in the store compared to the ones near the metroplex. The new store in Roanoke is pretty weak in this area.

Thanks for all the help. I found what I needed at Tractor Supply.
It was not the exact bearing but I was able to use the flange that fit the bearing that they had and luck had it the flange fit my hanger so I spent a little more and replaced all the flanges and bearing and got it going now if I could just get some rain to plant my food plot.