Posted By: TRoberts
Tikka T3 .473 bolt face, replacement bolt - 07/05/23 02:07 AM
Used for standard sized Calibers like: .22-250 Rem, .243 Win, .260 Rem, 7mm-08 Rem, .308 Win, 7.62x51mm, 6 & 6.5 Creedmoor
It’s from a Tikka T3, not the newer T3x, but will still work in a T3x model of receiver. This was shot approximately 100ish times out of a 7mm-08 T3. I’m repurposing the rifle to a 7mmPRC. This is a good bolt for someone wanting an extra or moving a Tikka from a magnum to a standard cartridge. Looking to get $275 shipped
![[Linked Image]](https://texashuntingforum.com/forum/pics/userpics/2023/07/full-37402-393411-img_3630.jpeg)
![[Linked Image]](https://texashuntingforum.com/forum/pics/userpics/2023/07/full-37402-393412-img_3631.jpeg)
![[Linked Image]](https://texashuntingforum.com/forum/pics/userpics/2023/07/full-37402-393413-img_3633.jpeg)
It’s from a Tikka T3, not the newer T3x, but will still work in a T3x model of receiver. This was shot approximately 100ish times out of a 7mm-08 T3. I’m repurposing the rifle to a 7mmPRC. This is a good bolt for someone wanting an extra or moving a Tikka from a magnum to a standard cartridge. Looking to get $275 shipped