carbon arrows with 300 spine

Who shoots them, and which ones do you recommend? I have 31 inch draw and a 72lb bow. Turns out the 350s that the guys at gander mountain sold me have been wrong all along, so I'm needing to upgrade.

You can get the 350 to work if you cut them shorter to 28"-29"

Try some Deer Crossing arrows if you want to go with the 300. Code Joe53 will get 10% off at check out.

That or turn the bow down to 62 or so pounds and those 350's will work.

Would turning down the poundage mess with my anchor point?

No.

poundage drop is best solution enless your shooting T-rex with a bow! 72 should be fast bow which all I would accomplish is a fast miss! Back it off and easier to find arrows and makes shooting a lot more fun!

Most arrow rests give you a 2-4" set back. I'm a 28" draw and shoot 26" arrows, due to I use 50gr in/outcerts and don't want to go up in spine/weight

Black eagle makes several long draw options. Steve's archery is a great guy to order from

Sorry. I meant to ask about the knocking point.

No

I'm taking everyone's advice. Looks like I can cut my arrows to 30 iinches, back off to 65lbs, and I'm switching to the 340's. Hopefully that should help my broadhead tunning problems.

At you draw length 65 is like me(28") pulling 75.

I think you will be plenty happy. Plus cheaper and less stress on your shoulder

Just be careful about your dynamic spine, its different from the static spine. I have to use 300 spine arrows with my 29.5" draw cause of the Broad Heads I use.