All I need is barrel and my build will be done

Here's what I have so far
Tikka T3 Hunter action (lefty)
Manners T6a stock bedded by Crescent Customs
CDI bottom metal
EGW 20 MOA base
Burris XTR ii 4-20x50
Now just deciding on which caliber and what barrel maker and picking up a different bolt handle and a couple other odds and ends . Anyone tried X-caliber barrels ? I can't decide and it depends on who has what I'm looking for in stock. I've looked at Hawk Hill, Brux , Rock Creek and Bartlien. I've narrowed it down to 260, 243 or 6.5x47L.

A Bartlein chambered in 6.5x47 would be my choice. Sweet rig regardless of the caliber.

.

www.bugholes.com

http://store.thirdgenerationshootingsupply.com

http://www.butchsreloading.com/shop/

You've got some great parts already assembled. Decide on contour, and build the 6.5 X 47

6.5x47L, gonna be a nice one

Thanks men. I'm leaning towards a Remington varmint contour or something similar because that's what my stock is channeled for.

A good contour. Opening up a barrel channel with Emory cloth is cheap, precise, and only requires some time.

In case you find a barrel slightly larger.

6.5x47 in a heavy Palma would be my choice.

I chose the Remington varmint profile Bartlein for my 6.5 Creedmoor build. I love the contour. It makes a balanced rifle and not too heavy.

I found a Bartlien , Brux and Benchmark all in 8.5 twist 5r rifling . Should I get an 8 twist with 4 groove or would the 5r be better. Also will I have to do anything to the bolt face since the 6.5x47 uses small rifle primers?

This link, along with advice from JG and Paul Reid, helped me with my build.

http://precisionrifleblog.com/2015/11/21/precision-rifle-barrels/

4 gr an 5r of mine shoot no different

http://www.grizzly.com/rifle-barrels

Nice