What are you using for preventing rust?

Curious as to what shooters are using to prevent rust on their blued firearms. Specifically referring to solvents/oils, not high dollar coatings or baked on finishes. Want to know what you are using for average hunting, not your safe queens or daily carry but your truck gun and go to gun. In my area we have a high humidity, and often taking a gun from the cold truck and bringing it into the cabin or house leaves it covered with condensation, plus I hunt/shoot in the rain.

Thin coat of clp usually applied with an old sock or t-shirt.

RemOil

Corrosion X

Academy has it. Usually in the marine section.

RemOil or Triflow. Both are teflon based oils.

I use birchwood barricade
http://www.midwayusa.com/product/685958/birchwood-casey-barricade-rust-preventative-6-oz-aerosol

Synthetic motor oil.

My wipedown chamois is soaked with PB Blaster. Automatic transmission fluid for lube.

I whipe it down with an oiled cleaning patch or towl every time I take i out.

Oil doesnt matter, if at home standing next to the safe there is remoil on top of the safe. If in the fild mobile one out of the extra quart in the back seat, if at the ranch rotela 15-40 out of the tractor botle. No vegi oil or anything like that, but im sure you know that.

matt

Good stuff... I live on the water down in south padre and I use this stuff on everything... I should buy stock in this stuff....

This or REM oil.

Hoppe's gun grease.

I forget what it's called, but yellow oil rag that comes in a jar.

I use frog lube and in the bottom of my safe i have silicon packets i get from work to keep the humidity in check.

The color(s) of Krylon of my choice followed by two coats of flat clear coat.

Ballistol

This.

Hoppes gun oil and a cotton cloth

Regular use and proper cleaning=no rust. Having more guns than time to regularly use and properly clean them, I use BC Barricade wipes every time I put one away.

eezox or b.c. sheath

X2 best stuff for preventing and stopping rust I have ever seen or used

I've been watching a break disc test on another forum where the guy divides the disc into sections and applys different products. The disc is left in the weather. The two (bar none) winners are CLP and WD40 LTCI. Rem-oil sucked! I've always used CLP and would explain why I have no rust.

http://www.wd40specialist.com/products/corrosion-inhibitor

The forum is the Marlin Owners Forum, I'm under "JoeS"

Wonder if that version of WD40 kills primers as fast as the original version

I'd sure like to knw how lightly wiping down your rifle with anything could kill a primer?